iMRP600 High-Efficiency Robot Chassis
iMRP600 High-Efficiency Robot Chassis
-
100kg-class load capacity:
45kg self-weight and 100kg load capacity, suitable for load-bearing in industrial scenarios. -
Dual LiDAR panoramic design:
Two 40m TOF LiDARs perform cross scanning to ensure stable operation. -
Reinforced front and rear anti-collision design:
Equipped with anti-collision bumpers on both ends to cope with accidental collisions. -
Automatic elevator access:
Compatible with elevator linkage system for autonomous elevator riding.
| Parameter | Specification |
|---|---|
| Dimensions | 600 × 450 × 260mm |
| Weight | 45kg |
| Endurance (No Load) | 12h |
| Charging Time | 3.5h |
| Max. Load Capacity | 100kg |
| Battery Capacity | 29.4V/20AH |
| Chassis Structure | 2 differential driving wheels + 4 universal wheels |
| Main Hardware Configuration |
2 × 20m TOF LiDAR 2 × 6.5-inch hub motors (with odometer) 1 × RGBD depth camera (0.3-2m) 1 × 6-axis IMU attitude sensor 2 × annular collision sensors |
| Max. Navigation Speed | 0.8m/s |
| Climbing Gradient | 5° |
| Obstacle Surmounting Height | 10mm |
| Trench Crossing Width | 40mm |
| Turning Radius | 0mm |
| Max. Rotation Speed | 60°/s |
| Positioning Accuracy | ±10cm |
| Mapping Area | 10000m² |
| Navigation Accuracy | ±10cm |
| Power Interface | 24V (200W) |
| USB Port | 2 ports for peripheral expansion |
| Network Interface | RJ45 (for communication and routing) |
| Physical Mounting Interface | Structural mounting holes |
| Other Interfaces | System switch, emergency stop switch |
| Charging Mode | Contact charging |
| Input Voltage | AC 110-240V |
| Output Voltage | 29.4V |
| Output Current | 7A |
| Protection Mechanism | Short circuit protection, overcurrent protection, etc. |
| Operating Temperature | 5℃ - 40℃ |
| Storage Temperature | -10℃ - 60℃ |